MEDVIC 연구실
MEchanical Design and VIbration Control
Publication
- HOME
- Publication
- Journal
Journal
(50) Kim, T. H., Park, M. S., Lee, T. W., 2017, "Design Optimization of Gas Foil Thrust Bearings for Maximum Load Capacity," Journal of Tribology.
(49) Kim, T. H., Park, M, S., Lee, J.,Kim, Y. M., Ha, K. K., Park, J., Lee, C., Kim, C., 2016, "Identification of Dynamic Characteristics of Gas Foil Thrust Bearings Using Base Excitation,"ASME Turbo Expo 2016.
(48) Lee, J., Kim, K. M., Park, M. S., Kim, T. H., Ha, K. K., Lee, C., Kim, S. H., 2016, "Rotordynamic Performance Measurements and Predictions of a Rotor Supported on Multilayer Gas Foil Journal Bearings for Microturbomachinery," ASME Turbo Expo 2016.
(47) Kim, T. H., Kim, Y. M., Lee, J., Park, M. S., Ha, K. K., Lee, C., Kim, C., 2016, "Duffing’s Vibration of a Rotor Supported on Gas Foil Bearings With Base Excitation: Measurements and Model Predictions," ASME Turbo Expo 2016.
(46) Lee, s., Song, Y., Koo, B.S., Kim, T. H., 2016, "FRI0402 Quantification of Fat Fraction of Vertebral Bone Marrow in Patients with Ankylosing Spondylitis", Annals of the Rheumatic Diseases 75.
(45) Kim, T. H., Jang, K, E, Choi, T. G., "Rotordynamic Performance Predictions of Flexure Pivot Tilting Pad Bearings and Comparison to Published Test Data," ASME Turbo Expo 2016.
(44) Sim, K., Song, J. W., Lee, Y. -B., Kim, T. H.*,Under review, "Effect of Cooling Flow Rate on Temperature of a Bump Type Gas Foil Bearing Floating on a Hot Rotor," ASME Journal of Tribology.
(43) Kim, T. H.*, Park, M., Lee, T. W.,Under re view, "Static Load Performance of Gas Foil Thrust Bearings: Effect of Ramp Heights," ASME Journal of Tribology.
(42) Kim, T. H.*, Lee, J., Kim, Y. M.,Under re view, "Static and Dynamic Structural Characterizations of Multilayer Gas Foil Bearings," ASME Journal of Tribology.
(41) Sim, K., Jang, S. -M., Lee, Y.-B., Kim, T. H.*,2015, "Thermal Analysis of High Speed Permanent Magnet Motor with Cooling Flows Supported on Gas Foil Bearings: Part II - Bearing Modeling and Case Studies," Journal of Mechanical Science and Technology, 29(12), pp. 5477-5483.
(40) Sim, K., Jang, S. -M., Lee, Y.-B., Kim, T. H.*,2015, "Thermal Analysis of High Speed Permanent Magnet Motor with Cooling Flows Supported on Gas Foil Bearings: Part I - Coupled Thermal and Loss Modeling," Journal of Mechanical Science and Technology, 29(12), pp. 5469-5476.
(39) Choe, B. S., Kim, T. H., Kim, C. H., Lee, Y. B.,2015, "Rotordynamic Behavior of 225 kW (330 HP) Class PMS Motor-Generator System Supported by Gas Foil Bearings," ASME Journal of Engineering for Gas Turbines and Power, 137(9), p. 092505.
(38) Sim, K., Koo, B., Lee J. S., Kim, T. H.*, 2014, "Effects of Mechanical Preloads on the Rotordynamic Performance of a Rotor Supported on Three-Pad Gas Foil Journal Bearings," ASME Journal of Engineering for Gas Turbines and Power, 136, p. 122503.
(37) Sim, K., Lee, Y. -B., Kim, T. H.*,2014, "Rotordynamic Analysis of an Oil-Free Turbocharger Supported on Lobed Gas Foil Bearings ? Predictions versus Test Data," STLE Tribology Transactions, 57(6), pp. 108-1095.
(36) Sim, K., Koo, B., Lee J. S., Kim, T. H.*,2014, "Identification of the Dynamic Performance of a Gas Foil Journal Bearing Operating at High Temperatures," Journal of Mechanical Science and Technology, 28(1), pp.43-51.
(35) Sim,, K., Kwon S. B., Kim, T. H., Lee, Y. -B.,2013, "Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings via On-Road Tests of a 2-Liter Class Diesel Vehicle," ASME Journal of Engineering for Gas Turbines and Power, 135(5), 052701.
(34) Sim, K., Lee. Y.-B.Kim, T. H.*,2013, "Effects of Mechanical Preload and Bearing Clearance on Rotordynamic Performance of Lobed Gas Foil Bearings for Oil-Free Turbochargers," STLE Tribology Transactions, 56, pp. 224-235.
(33) Sim, K., Koo, B., Kim, C. H., Kim, T. H.*,2013, "Development and Performance Measurement of Micro Power Pack Using Micro Gas Turbine Driven Automotive Alternators," Applied Energy, 102, pp. 309 - 319.
(32) Sim, K., Song, J. W., Lee, Y. B., Kim, T. H., “Effect of Cooling Flow Rate on Temperature of a Bump Type Gas Foil Bearing Floating on a Hot Rotor,” ASME Journal of Tribology, Accepted.
(31) Sim, K., Lee. Y. B. Kim, T. H., “Effects of Mechanical Preload and Bearing Clearance on Rotordynamic Performance of Lobed Gas Foil Bearings for Oil-Free Turbochargers,” STLE Tribology Transactions, 56, pp. 224-235.
(30) Sim,, K., Kwon S. B., Kim, T. H., Lee, Y. B., “Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings via On-Road Tests of a 2-Liter Class Diesel Vehicle,” ASME Journal of Engineering for Gas Turbines and Power, 135(5), p.052701.
(29) Sim, K., Koo, B., Kim, C. H., Kim, T. H., 2013, “Development and Performance Measurement of Micro Power Pack Using Micro Gas Turbine Driven Automotive Alternators,” Applied Energy, 102, pp.309-319.
(28) Sim, K., Lee, J., Kim, C. H., Lee, Y. B., Kim, T. H., 2012, “Rotordynamic Performance of Shimmed Gas Foil Bearings for Oil-Free Turbochargers,” ASME Journal of Tribology, 134, 031102. (ASME Journal of Tribology 2012 Best Paper Award)
(27) Sim, K. , Kim, T. H., 2012, “Thermohydrodynamic Analysis of Bump-type Gas Foil Bearings Using Bump Thermal Contact and Inlet Flow Mixing Models,” Tribology International, 48, pp. 137-148.
(26) Lee, Y. B., Park, D. J., Kim, T. H., Sim, K., 2012, “Development and Performance Measurement of Oil-Free Turbocharger Supported on Gas Foil Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(3), 032506.
(25) Kim, T. H., Song J. W., Lee, Y. B., Sim, K., 2012, “Thermal Performance of a Bump Type Gas Foil Bearing Floating on a HollowShaft for Increasing Rotating Speed and Static Load,” ASME Journal of Engineering for Gas Turbines and Power, 134(2), 0124501.
(24) Kim, T. H., Kim, T. Y., Jung, K. H., Lee, Y. B., 2012, “Rotordynamic Performance of an Oil-Free Turboblower Focusing on Load Capacity of Gas Foil Thrust Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(2), 022501.
(23) Lee, Y. B., Kim, T. Y., Kim, C. H., Kim, T. H., 2012, “Effects of Metal Density on Static Load Performance of Metal Mesh Gas Foil Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(1), 012502.
(22) Lee, Y. B., Kim, T. H., Kim, C. H., Kim, T. Y., 2011, “Thrust Bump Air Foil Bearings with Variable Axial Load: Theoretical Predictions and Experiments,” STLE Tribology Transactions, 54, pp.902-910.
(21) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System. Part 2: Predictions Versus Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 133(6), 062502.
(20) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System. Part 1: Measurements,” ASME Journal of Engineering for Gas Turbines and Power, 133(6), 062501.
(19) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Identification of Structural Stiffness and Energy Dissipation Parameters in a 2nd Generation Foil Bearing- Effect of Shaft Temperature,” ASME Journal of Engineering for Gas Turbines and Power, 133(3), 032501.
(18) San Andres, L., Chirathandam, T. A., Ryu, K., and Kim, T. H., 2010, “Measurements of Drag Torque, Lift-Off Journal Speed and Temperature in a Metal Mesh Foil Bearing,” ASME Journal of Engineering for Gas Turbines and Power, 132(11), 112503.
(17) San Andres, L., and Kim, T. H., 2010, “Thermohydrodynamic Analysis of Bump Type Gas Foil Bearings: A Model Anchored to Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 132(4), 042504
(16) San Andres, L., Chirathandam, T. A., and Kim, T. H., 2010, “Measurement of Structural Stiffness and Damping in a Metal Mesh Foil Bearing,” ASME Journal of Engineering for Gas Turbines and Power, 132(3), 032503
(15) Kim, T. H., San Andres, L., 2010, "Thermohydrodynamic Model Predictions and Performance Measurements of Bump-type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems", ASME Journal of Tribology, 132(1), 011701 (ASME Journal of Tribology 2010 Best Paper Award)
(14) Kim, T. H., Breedlove, A. W., and San Andres, L., 2009, “Characterization of Foil Bearing Structure at Increasing Shaft Temperatures: Static Load and dynamic force Performance,” ASME Journal of Tribology, 131(4), 041703.
(13) Kim, T. H., and San Andres, L., 2009, “Effects of a Mechanical Preload on the Dynamic Force Response of Gas Foil Bearings ? Measurements and Model Predictions,” STLE Tribology Transactions, 52, pp. 569-580.
(12) San Andres, L., and Kim, T. H., 2009, “Analysis of Gas Foil Bearings Integrating FE Top Foil Models,” Tribology International, 42, pp.111-120.
(11) Kim, T. H., and San Andres, L., 2009, “Effect of Side End Pressurization on the Dynamic Performance of Gas Foil Bearings ? A Model Anchored to Test Data", ASME Journal of Engineering for Gas Turbines and Power, 131(1), 012501.
(10) San Andres, L., and Kim, T. H., 2008, “Forced Nonlinear Response of Gas Foil Bearing Supported Rotors,” Tribology International, 41(8), pp. 704-715.
(9) Pan, C., Kim, T. H., and Rencis, J. J., 2008, “Rolling Stream Trails-An Alternative Cavitation Analysis,” ASME Journal of Tribology, 130(2), 021703.
(8) Kim, T. H., and San Andres, L., 2008, “Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 130(1), 012504.
(7) San Andres, L., Rubio, D., and Kim, T. H., 2007, “Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions,” ASME Journal of Engineering for Gas Turbines and Power, 129(3), pp. 850-857.
(6) Kim, T. H., and L. San Andres, 2007, “Analysis of Advanced Gas Foil Bearings with Series Elastic Supports,” Tribology International, 40(8), pp. 1239-1245.
(5) Kim, T. H., and San Andres, L., 2006, “Limits for High Speed Operation of Gas Foil Bearings,” ASME Journal of Tribology, 128, pp. 670-673.
(4) Lee, Y. B., Kim, T. H., Kim, C. H., Lee, N. S. and Choi, D. H., 2004, “Dynamic Characteristics of a Flexible Rotor System Supported by Viscoelastic Foil Bearings (VEFB),” Tribology International, 37, pp 679-687.
(3) Lee, Y. B., Kim, T. H., Kim, C. H. and Lee, N. S., 2004, “Unbalance Response of a Super-critical Rotor Supported by Foil Bearings - Comparison with Results,” STLE Tribology Transactions, 47, pp 54-60.
(2) Lee, Y. B., Kim, T. H., Kim, C. H., and Lee, N. S., 2003, “Suppression of Subsynchronous Vibrations Due to Aerodynamic Response to Surge in a Two-stage Centrifugal Compressor with Air Foil Bearings", STLE Tribology Transactions, 46, pp 428-434.
(1) Lee, N. S., Choi, D. H., Lee, Y. B., Kim, T. H., and Kim, C. H., 2002, “The Influence of the Slip Flow on Steady-State Load Capacity, Stiffness and Damping Coefficients of Elastically Supported Gas Foil Bearings,” STLE Tribology Transactions, 45, pp 478-484
(49) Kim, T. H., Park, M, S., Lee, J.,Kim, Y. M., Ha, K. K., Park, J., Lee, C., Kim, C., 2016, "Identification of Dynamic Characteristics of Gas Foil Thrust Bearings Using Base Excitation,"ASME Turbo Expo 2016.
(48) Lee, J., Kim, K. M., Park, M. S., Kim, T. H., Ha, K. K., Lee, C., Kim, S. H., 2016, "Rotordynamic Performance Measurements and Predictions of a Rotor Supported on Multilayer Gas Foil Journal Bearings for Microturbomachinery," ASME Turbo Expo 2016.
(47) Kim, T. H., Kim, Y. M., Lee, J., Park, M. S., Ha, K. K., Lee, C., Kim, C., 2016, "Duffing’s Vibration of a Rotor Supported on Gas Foil Bearings With Base Excitation: Measurements and Model Predictions," ASME Turbo Expo 2016.
(46) Lee, s., Song, Y., Koo, B.S., Kim, T. H., 2016, "FRI0402 Quantification of Fat Fraction of Vertebral Bone Marrow in Patients with Ankylosing Spondylitis", Annals of the Rheumatic Diseases 75.
(45) Kim, T. H., Jang, K, E, Choi, T. G., "Rotordynamic Performance Predictions of Flexure Pivot Tilting Pad Bearings and Comparison to Published Test Data," ASME Turbo Expo 2016.
(44) Sim, K., Song, J. W., Lee, Y. -B., Kim, T. H.*,Under review, "Effect of Cooling Flow Rate on Temperature of a Bump Type Gas Foil Bearing Floating on a Hot Rotor," ASME Journal of Tribology.
(43) Kim, T. H.*, Park, M., Lee, T. W.,Under re view, "Static Load Performance of Gas Foil Thrust Bearings: Effect of Ramp Heights," ASME Journal of Tribology.
(42) Kim, T. H.*, Lee, J., Kim, Y. M.,Under re view, "Static and Dynamic Structural Characterizations of Multilayer Gas Foil Bearings," ASME Journal of Tribology.
(41) Sim, K., Jang, S. -M., Lee, Y.-B., Kim, T. H.*,2015, "Thermal Analysis of High Speed Permanent Magnet Motor with Cooling Flows Supported on Gas Foil Bearings: Part II - Bearing Modeling and Case Studies," Journal of Mechanical Science and Technology, 29(12), pp. 5477-5483.
(40) Sim, K., Jang, S. -M., Lee, Y.-B., Kim, T. H.*,2015, "Thermal Analysis of High Speed Permanent Magnet Motor with Cooling Flows Supported on Gas Foil Bearings: Part I - Coupled Thermal and Loss Modeling," Journal of Mechanical Science and Technology, 29(12), pp. 5469-5476.
(39) Choe, B. S., Kim, T. H., Kim, C. H., Lee, Y. B.,2015, "Rotordynamic Behavior of 225 kW (330 HP) Class PMS Motor-Generator System Supported by Gas Foil Bearings," ASME Journal of Engineering for Gas Turbines and Power, 137(9), p. 092505.
(38) Sim, K., Koo, B., Lee J. S., Kim, T. H.*, 2014, "Effects of Mechanical Preloads on the Rotordynamic Performance of a Rotor Supported on Three-Pad Gas Foil Journal Bearings," ASME Journal of Engineering for Gas Turbines and Power, 136, p. 122503.
(37) Sim, K., Lee, Y. -B., Kim, T. H.*,2014, "Rotordynamic Analysis of an Oil-Free Turbocharger Supported on Lobed Gas Foil Bearings ? Predictions versus Test Data," STLE Tribology Transactions, 57(6), pp. 108-1095.
(36) Sim, K., Koo, B., Lee J. S., Kim, T. H.*,2014, "Identification of the Dynamic Performance of a Gas Foil Journal Bearing Operating at High Temperatures," Journal of Mechanical Science and Technology, 28(1), pp.43-51.
(35) Sim,, K., Kwon S. B., Kim, T. H., Lee, Y. -B.,2013, "Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings via On-Road Tests of a 2-Liter Class Diesel Vehicle," ASME Journal of Engineering for Gas Turbines and Power, 135(5), 052701.
(34) Sim, K., Lee. Y.-B.Kim, T. H.*,2013, "Effects of Mechanical Preload and Bearing Clearance on Rotordynamic Performance of Lobed Gas Foil Bearings for Oil-Free Turbochargers," STLE Tribology Transactions, 56, pp. 224-235.
(33) Sim, K., Koo, B., Kim, C. H., Kim, T. H.*,2013, "Development and Performance Measurement of Micro Power Pack Using Micro Gas Turbine Driven Automotive Alternators," Applied Energy, 102, pp. 309 - 319.
(32) Sim, K., Song, J. W., Lee, Y. B., Kim, T. H., “Effect of Cooling Flow Rate on Temperature of a Bump Type Gas Foil Bearing Floating on a Hot Rotor,” ASME Journal of Tribology, Accepted.
(31) Sim, K., Lee. Y. B. Kim, T. H., “Effects of Mechanical Preload and Bearing Clearance on Rotordynamic Performance of Lobed Gas Foil Bearings for Oil-Free Turbochargers,” STLE Tribology Transactions, 56, pp. 224-235.
(30) Sim,, K., Kwon S. B., Kim, T. H., Lee, Y. B., “Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings via On-Road Tests of a 2-Liter Class Diesel Vehicle,” ASME Journal of Engineering for Gas Turbines and Power, 135(5), p.052701.
(29) Sim, K., Koo, B., Kim, C. H., Kim, T. H., 2013, “Development and Performance Measurement of Micro Power Pack Using Micro Gas Turbine Driven Automotive Alternators,” Applied Energy, 102, pp.309-319.
(28) Sim, K., Lee, J., Kim, C. H., Lee, Y. B., Kim, T. H., 2012, “Rotordynamic Performance of Shimmed Gas Foil Bearings for Oil-Free Turbochargers,” ASME Journal of Tribology, 134, 031102. (ASME Journal of Tribology 2012 Best Paper Award)
(27) Sim, K. , Kim, T. H., 2012, “Thermohydrodynamic Analysis of Bump-type Gas Foil Bearings Using Bump Thermal Contact and Inlet Flow Mixing Models,” Tribology International, 48, pp. 137-148.
(26) Lee, Y. B., Park, D. J., Kim, T. H., Sim, K., 2012, “Development and Performance Measurement of Oil-Free Turbocharger Supported on Gas Foil Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(3), 032506.
(25) Kim, T. H., Song J. W., Lee, Y. B., Sim, K., 2012, “Thermal Performance of a Bump Type Gas Foil Bearing Floating on a HollowShaft for Increasing Rotating Speed and Static Load,” ASME Journal of Engineering for Gas Turbines and Power, 134(2), 0124501.
(24) Kim, T. H., Kim, T. Y., Jung, K. H., Lee, Y. B., 2012, “Rotordynamic Performance of an Oil-Free Turboblower Focusing on Load Capacity of Gas Foil Thrust Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(2), 022501.
(23) Lee, Y. B., Kim, T. Y., Kim, C. H., Kim, T. H., 2012, “Effects of Metal Density on Static Load Performance of Metal Mesh Gas Foil Bearings,” ASME Journal of Engineering for Gas Turbines and Power, 134(1), 012502.
(22) Lee, Y. B., Kim, T. H., Kim, C. H., Kim, T. Y., 2011, “Thrust Bump Air Foil Bearings with Variable Axial Load: Theoretical Predictions and Experiments,” STLE Tribology Transactions, 54, pp.902-910.
(21) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System. Part 2: Predictions Versus Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 133(6), 062502.
(20) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Thermal Management and Rotordynamic Performance of a Hot Rotor-Gas Foil Bearings System. Part 1: Measurements,” ASME Journal of Engineering for Gas Turbines and Power, 133(6), 062501.
(19) San Andres, L., Ryu, K., and Kim, T. H., 2011, “Identification of Structural Stiffness and Energy Dissipation Parameters in a 2nd Generation Foil Bearing- Effect of Shaft Temperature,” ASME Journal of Engineering for Gas Turbines and Power, 133(3), 032501.
(18) San Andres, L., Chirathandam, T. A., Ryu, K., and Kim, T. H., 2010, “Measurements of Drag Torque, Lift-Off Journal Speed and Temperature in a Metal Mesh Foil Bearing,” ASME Journal of Engineering for Gas Turbines and Power, 132(11), 112503.
(17) San Andres, L., and Kim, T. H., 2010, “Thermohydrodynamic Analysis of Bump Type Gas Foil Bearings: A Model Anchored to Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 132(4), 042504
(16) San Andres, L., Chirathandam, T. A., and Kim, T. H., 2010, “Measurement of Structural Stiffness and Damping in a Metal Mesh Foil Bearing,” ASME Journal of Engineering for Gas Turbines and Power, 132(3), 032503
(15) Kim, T. H., San Andres, L., 2010, "Thermohydrodynamic Model Predictions and Performance Measurements of Bump-type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems", ASME Journal of Tribology, 132(1), 011701 (ASME Journal of Tribology 2010 Best Paper Award)
(14) Kim, T. H., Breedlove, A. W., and San Andres, L., 2009, “Characterization of Foil Bearing Structure at Increasing Shaft Temperatures: Static Load and dynamic force Performance,” ASME Journal of Tribology, 131(4), 041703.
(13) Kim, T. H., and San Andres, L., 2009, “Effects of a Mechanical Preload on the Dynamic Force Response of Gas Foil Bearings ? Measurements and Model Predictions,” STLE Tribology Transactions, 52, pp. 569-580.
(12) San Andres, L., and Kim, T. H., 2009, “Analysis of Gas Foil Bearings Integrating FE Top Foil Models,” Tribology International, 42, pp.111-120.
(11) Kim, T. H., and San Andres, L., 2009, “Effect of Side End Pressurization on the Dynamic Performance of Gas Foil Bearings ? A Model Anchored to Test Data", ASME Journal of Engineering for Gas Turbines and Power, 131(1), 012501.
(10) San Andres, L., and Kim, T. H., 2008, “Forced Nonlinear Response of Gas Foil Bearing Supported Rotors,” Tribology International, 41(8), pp. 704-715.
(9) Pan, C., Kim, T. H., and Rencis, J. J., 2008, “Rolling Stream Trails-An Alternative Cavitation Analysis,” ASME Journal of Tribology, 130(2), 021703.
(8) Kim, T. H., and San Andres, L., 2008, “Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data,” ASME Journal of Engineering for Gas Turbines and Power, 130(1), 012504.
(7) San Andres, L., Rubio, D., and Kim, T. H., 2007, “Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions,” ASME Journal of Engineering for Gas Turbines and Power, 129(3), pp. 850-857.
(6) Kim, T. H., and L. San Andres, 2007, “Analysis of Advanced Gas Foil Bearings with Series Elastic Supports,” Tribology International, 40(8), pp. 1239-1245.
(5) Kim, T. H., and San Andres, L., 2006, “Limits for High Speed Operation of Gas Foil Bearings,” ASME Journal of Tribology, 128, pp. 670-673.
(4) Lee, Y. B., Kim, T. H., Kim, C. H., Lee, N. S. and Choi, D. H., 2004, “Dynamic Characteristics of a Flexible Rotor System Supported by Viscoelastic Foil Bearings (VEFB),” Tribology International, 37, pp 679-687.
(3) Lee, Y. B., Kim, T. H., Kim, C. H. and Lee, N. S., 2004, “Unbalance Response of a Super-critical Rotor Supported by Foil Bearings - Comparison with Results,” STLE Tribology Transactions, 47, pp 54-60.
(2) Lee, Y. B., Kim, T. H., Kim, C. H., and Lee, N. S., 2003, “Suppression of Subsynchronous Vibrations Due to Aerodynamic Response to Surge in a Two-stage Centrifugal Compressor with Air Foil Bearings", STLE Tribology Transactions, 46, pp 428-434.
(1) Lee, N. S., Choi, D. H., Lee, Y. B., Kim, T. H., and Kim, C. H., 2002, “The Influence of the Slip Flow on Steady-State Load Capacity, Stiffness and Damping Coefficients of Elastically Supported Gas Foil Bearings,” STLE Tribology Transactions, 45, pp 478-484